 |
      |
|
Click to enlarge image(s)
|
This May Be The Last Water Heater You Ever Buy
Rated at 18 kilowatts at 240 Volts at a Max of 75 Amps. An optional sub-panel is available from us which is supplied with two, two pole 40 Amp breakers. The Sub-panel is normally wired to the main panel using a 80 Amp breaker and four gauge wire directly to the sub-panel. The sub-panel contains a two dual40 Amp breakers for easy hookup. Note that normally 8/2 ga. wires from each breaker leads to the tankless. This is designed to keep your installation to Code. Please check your community's electrical Codes for proper installation of your heater. We suggest using licensed, qualified individuals for all tankless water heater installations. With a one year Warranty on the replaceable heating elements, three years on the electronics and a lifetime on the heat exchanger, this may very well be the last water heater you ever need to buy. Rated at 16 kilowatts at 240 Volts at a Max of 66 Amps. An optional sub-panel is available from us which is supplied with two, two pole 35 Amp breakers. The Sub-panel is normally wired to the main panel using a 70 Amp breaker and four gauge wire directly to the sub-panel. The sub-panel contains two dual35 Amp breakers for easy hookup. Note that normally 8/2 ga. wires from each breaker leads to the tankless. This is designed to keep your installation to Code. Please check your community's electrical Codes for proper installation of your heater. We suggest using licensed, qualified individuals for all tankless water heater installations. With a one year Warranty on the replaceable heating elements, three years on the electronics and a lifetime on the water carrying parts, this may very well be, the last water heater you ever need. CSA 22.2 approved for use in Canada, ETL listed UL #834 listed and #499 UL Compliant for your safe use in the USA
|
Dimensions
|
16" X 13.5" X 3.25"
|
|
Shipping Weight
|
22 Pounds
|
|
Body / Heat Exchanger
|
Stanless Steel
|
|
Elements
|
3 Brass Flange / Copper / Stainless Steel
|
|
Pipe Fittings
|
Stainless Steel 3/4" NPT
|
|
Activation Flow Rate
|
0.25 Gallons per Minute
|
|
Operation Pressure
|
Min 25 PSI, Max 150 PSI
|
|
Required Wire Gauge from Main to Subpanel
|
4 ga
|
|
Required Wire from Subpanel to Tankless
|
8 ga (Consult and Electrician)
|
|
Cover
|
Brushed Stainless Steel
|
|
Volts
|
240
|
|
United States
|
ETL #834 Approved #499 UL Compliant
|
|
Canada
|
CSA Approved
|
|
Stand-by Heat Loss
|
0%
|
|
Max Power
|
75.0 Amp
|
|
Required Breaker
|
80 Amp/2pole Service Panel
|
|
Subpanel (Avilable for Purchase)
|
Two 40 Amp/2Pole & Siemens Subpanel
|
