ADK-7

Home Product Search Site Map Checkout Track Your Order Wish List

Home ► ADK-7

Note: All prices in US Dollars

Used in smaller applications such as point of use and whole house dependent on your hot water needs and incoming water temperature. Limited Life-time Warranty makes this an unbeatable buy.

Click to enlarge image(s)

The ADK-7 uses 240 Volts at 6.4 kilowatts at a Max of 29 Amps using a two pole 30 Amp breaker. The temperature rise chart illustrates the flow rates and temperature rise which can be achieved with different ADK Models. The chart is based on a 240 volt input voltage and maximum flow rates are listed for various incoming water temperature levels. If your home or business has less than 240 volt power (208v), your flow rate will be lower. Simply look up your incoming water temperature and desired flow rate to determine your model choice. Temperature of your incoming water change throughout the year. When planning the final replacement of your old tank water heater then be sure to find the cold incoming water in the winter when calculating your temperature rise. Click on Handy Charts, Heat Rise Charts and Maps to the right. ----->
ETL #834 UL #499 Compliant and CSA 22.2 approved for your safe use here in the USA.
See "Info" below for specifications.

Specifications
First Hour Rate	240 Gallons Per Hour
Size	1.4 Cubic Feet
Dimension	12" X 9" X 4"
Shipping Weight	8 Pounds
Usage kW / Hour	6.4
Stand-by Heat Loss in kW / Day	0%
Supply of Hot Water	Endless
Max Power	29 Amps
Activation Flow Rate	0.25 Gallons / Minute
Pipe Fittings	Stainless Steel 1/2"
Volts	240
Pressure	Min-5 PSI / Max-150 PSI
Unitd States	ETL #834 Listed, #499 UL Compliant
CSA, Canada	CSA Approval
Required Breaker	40 Amp, 2 Pole
Required Wire	8 ga., Keep to Code, Consult an Electrician

Home · About Us · Contact Us · Shipping · Privacy Policy · Links